Skip to content

Portfolio · 71 case studies

Engineering work we have delivered, with the drawings to prove it

Every project below was modelled, analysed or detailed by our engineers for a manufacturing client. Each case study states the brief, the inputs we worked from, what we delivered and the standards applied. Client names appear where we have permission; otherwise the sector is given and the name withheld under NDA.

India · UK · Australia · internationalSolidWorks · Solid Edge · Creo · Inventor · NX · AutoCADChecked and delivered by our engineers
High-speed electric motor test rig designed for a UK drivetrain developer
CAD model of a spiral bevel crown gear meshing with a spiral bevel pinion
Gearboxes & Power TransmissionGearboxes & Drives

15 kW Spiral Bevel Gear Pair for a Right-Angle Drive

A 40T/10T spiral bevel gear pair (module 3.11, 34.5° spiral angle) designed and rated in KISSsoft for a 15 kW right-angle drive, with crown gear, hollow output shaft and housing drawings plus DXF and STEP data.

SolidWorks · KISSsoftIndia
CAD model of a two-stage helical gearbox housing with top cover, inspection cover and twin output shafts
Gearboxes & Power TransmissionGearboxes & Drives

25 kW Two-Stage Helical Gearbox with Twin Outputs

A 25 kW, 1750 rpm two-stage helical gearbox (ratio 6.33) with left- and right-hand 40T output gears, a fabricated housing with top cover and acrylic inspection window, 36-item BOM and 24 part drawings.

SolidWorks · KISSsoftIndia
2D Drawing to 3D Model Conversion
Industrial Machinery & PressesDrafting, Conversion & MBD

2D Drawing to 3D Model Conversion

Legacy 2D drawings converted into fully-featured parametric 3D models — with the ambiguities in the original drawings resolved rather than guessed at.

SolidWorks · AutoCADIndia
CAD model of a 3-ton heat pump unit showing the welded structure, enclosure panels and internal component layout
Industrial Machinery & PressesMachines & Equipment

3-Ton Heat Pump Unit: Structure and Assembly Documentation

Structure, panels and complete assembly documentation for a 3-ton heat pump unit — welded frame, sheet-metal enclosure, component layout and a nine-sheet structure assembly drawing set, produced in SolidWorks for an engineering services partner.

SolidWorksIndia
3D Scanning to Production CAD
Industrial Machinery & PressesReverse Engineering

3D Scanning to Production CAD

3D scanning converted into production CAD — point cloud to clean parametric solid model that can be edited, dimensioned and manufactured.

SolidWorks · GeomagicIndia
Ghosted CAD model of an agricultural primary right-angle bevel gearbox showing the bevel pinion and crown wheel, splined input shaft and perimeter-bolted split casing
Agricultural EquipmentGearboxes & Drives

Agricultural Primary Gearbox

Primary reduction gearbox for agricultural machinery — designed for shock loading, field conditions and serviceability with basic workshop tools.

SolidWorksIndia
CAD assembly of a multi-stage agricultural secondary gearbox showing a right-angle bevel input stage, a cylindrical gear reduction under a bolted top cover and a roller-bearing output
Agricultural EquipmentGearboxes & Drives

Agricultural Secondary Gearbox

Secondary reduction gearbox matched to an existing agricultural primary drive — designed to bolt onto the established mounting interface.

SolidWorksIndia
CAD model of an aluminium grid-frame platform dolly on four swivel castors
Sheet Metal & Steel FabricationFabrication & Structures

Aluminium Platform Dolly

A bolted aluminium platform dolly on four 100 mm swivel castors — grid frame of aluminium sections joined with 16 M10 hex bolts — modelled, detailed with a parts list and issued with STEP and 3D PDF for a fabrication shop.

SolidWorksAustralia
CAD model of an automated scraping machine with geared-motor drive and a pneumatic gripper assembly
Industrial Machinery & PressesMachines & Equipment

Automated Scraping Machine with Pneumatic Gripper

Design of an automated scraping machine driven by a geared motor through a pinion and rack, plus a pneumatic gripper assembly using catalogue cylinders — modelled in SolidWorks for an automation integrator with drawings and DXF for fabrication.

SolidWorksIndia
CNC Cutting Machine Design
Industrial Machinery & PressesMachines & Equipment

CNC Cutting Machine Design

Three-axis CNC cutting machine design — gantry, linear motion, spindle mount and bed modelled as a complete machine with stiffness in mind.

SolidWorksIndia
CNC Programming & Toolpaths
Industrial Machinery & PressesDrafting, Conversion & MBD

CNC Programming & Toolpaths

CNC programming and toolpath generation from 3D CAD models — machining strategy, tool selection and post-processed G-code ready for the machine.

SolidWorks CAM · MastercamIndia
CAD model of a curved metal feature arch frame built from lattice solid bar
Sheet Metal & Steel FabricationFabrication & Structures

Café Bar Feature Arch in Solid Bar

A hospitality fit-out feature arch built from 20 × 20 solid bar lattice, 3 mm sheet strips and 20 × 12 × 3 angle, modelled as a full assembly and issued with a 44-item cut list so the fabricator could cut, jig and weld it in one pass.

SolidWorksAustralia
Carton Cutting & Sizing Machine
Packaging & Converting MachineryMachines & Equipment

Carton Cutting & Sizing Machine

Complete design of a carton cutting and sizing machine — frame, roller stack, gear drive and infeed table modelled as one working assembly.

SolidWorks · AutoCADIndia
Carton Folding Machine
Packaging & Converting MachineryMachines & Equipment

Carton Folding Machine

Carton folding machine design — folding stations, conveyor path and drive layout designed to handle board without marking or jamming it.

SolidWorksIndia
CAD section of a centrifugal separator bowl assembly with distributor, disc stack and spindle
Pumps, Valves & Fluid HandlingMachines & Equipment

Centrifugal Separator Bowl & Spindle Assemblies

Bowl, bowl hood, distributor, top disc and spindle assemblies of an industrial disc-stack centrifugal separator rebuilt as parametric SolidWorks models from supplier 2D drawings and STEP data, with manufacturing drawings for local production.

SolidWorksIndia
CAD model of a concentric reduction gearbox integrated with an electric motor and inverter
Gearboxes & Power TransmissionGearboxes & Drives

Concentric Reduction Gearbox for an Electric Drive Unit

Concept-to-detail design of a concentric reduction gearbox packaged around an electric motor for a UK drivetrain developer — gear train, housing, bearings, sealing and CV-joint interface, iterated with the client through weekly design reviews.

SolidWorks · KISSsoftUnited Kingdom
Concept to Production Product Development
Industrial Machinery & PressesProduct Development

Concept to Production Product Development

End-to-end product development — concept, detailed design, design for manufacture review and a complete production drawing package.

SolidWorks · AutoCADIndia
Custom Mechanism Development
Industrial Machinery & PressesMachines & Equipment

Custom Mechanism Development

Custom mechanism development — linkage geometry worked out and modelled through its full range of motion before committing to hardware.

SolidWorksIndia
CAD model of a DN250 Y-type globe valve body with flanged ends
Pumps, Valves & Fluid HandlingDrafting, Conversion & MBD

DN250 Class 150 Bellow-Seal Globe Valve: 2D to 3D

Body, bonnet, plug and stem of a 250 NB class 150 Y-type bellow-seal globe valve modelled in SolidWorks from the valve maker's 2D drawings, with flange drilling to the standard, machining allowances and a mated assembly for the maker's catalogue and manufacturing.

SolidWorksIndia
CAD model of a multirotor drone airframe with motor housings and a payload mechanism
Industrial Machinery & PressesProduct Development

Drone Airframe, Motor Housing & Payload Mechanism

Airframe, motor housings and a payload mechanism for a drone start-up, designed in SolidWorks from the client's concept drawings and photographs under NDA, with drawings for machining and printing.

SolidWorksIndia
Ansys total deformation plot of an electric drive unit gearbox housing under 7,000 N·m forward torque
Gearboxes & Power TransmissionGearboxes & Drives

EV Gearbox Housing FEA: Torque, Static and Shock Load Cases

Ansys structural analysis of an electric drive unit gearbox and motor housing under 7,000 N·m forward and reverse torque, bolted-joint static cases and 10 g shock in several orientations, with deformation and stress maps used to revise the housing before casting.

Ansys · SolidWorksUnited Kingdom
Ghosted CAD view of a vertical epicyclic pump gear drive showing the internal ring gear, planet gears and ribbed housing with split clamped collars
Pumps, Valves & Fluid HandlingGearboxes & Drives

Epicyclic Pump Gear Drive

Vertical epicyclic gear drive for a pump — internal ring gear and planet set inside a ribbed housing, driven from an offset motor mount.

SolidWorks · Creo ParametricIndia
Solid Edge model of a twin-screw extruder gearbox with torque-splitting output stage and thrust bearing pack
Gearboxes & Power TransmissionGearboxes & Drives

Extruder Gearbox Range in Solid Edge

A family of single- and twin-screw extruder gearboxes — torque-splitting twin-output units with thrust packs — documented as Solid Edge assemblies with sectional GAs and machining drawings for every frame size.

Solid Edge · AutoCADIndia
Isometric CAD model of a fabricated gearbox housing showing internal bearing seats with machining allowance, a twelve-hole bolt circle and integrated mounting lugs
Gearboxes & Power TransmissionFabrication & Structures

Fabricated Gearbox Housing Design

A gearbox housing designed as a welded fabrication instead of a casting — plate-by-plate detailing with weld preparation and machining allowances.

SolidWorks · AutoCADIndia
CAD model of a machine-tool feed box scoop arm rebuilt from 3D scan data and redesigned
Gearboxes & Power TransmissionReverse Engineering

Feed Box Scoop: 3D Scan, CAD Rebuild and Lighter, Stronger Redesign

An R&D project for a gear manufacturer: the existing machine-tool feed box scoop and table gear parts were 3D scanned, rebuilt as parametric SolidWorks models from the scan, then redesigned through several revisions to use less metal while making the loaded sections stronger.

SolidWorksIndia
CAD model of a folded stainless steel cladding panel with returned edges
Sheet Metal & Steel FabricationFabrication & Structures

Folded 304 Stainless Cladding Panels

A set of folded 1.5 mm 304 stainless cladding panels in No. 4 finish — 1158 × 901, 1196 × 901, 1487 × 443, 547 × 443 and 417 × 778 blanks with 17 mm returns — modelled with grain direction and issued as 13 flat-pattern drawings from an engineering brief and site photographs.

SolidWorksAustralia
CAD model of a single-plate friction clutch with pressure plate, diaphragm and flywheel
Gearboxes & Power TransmissionMachines & Equipment

Friction Clutch & Flywheel Assembly Redesign

Single-plate friction clutch, pressure plate and flywheel assembly redesigned in SolidWorks from existing pressure-plate and clutch-plate drawings and reference parts, with a complete main assembly, centre-pin variant and manufacturing drawings.

SolidWorksIndia
CAD model of a tandem-axle trailer carrying a diesel pump set with portal frame and hood
Pumps, Valves & Fluid HandlingMachines & Equipment

HD4K Trailer-Mounted Pump Unit with Tandem Axles

Trailer-mounted variant of a heavy-duty pump set — 3.5 t towing, tandem axles rated 4 t, UB portal, RHS hood posts, sheet-metal hood and guards, engine and pump — built as a fully mated SolidWorks assembly with structural and GA concepts and an R4 drawing set.

SolidWorksUnited Kingdom
Ansys von Mises stress plot of a helical gear train showing contact stress on the pinion and gear teeth
Gearboxes & Power TransmissionGearboxes & Drives

Helical Gear Pair Contact Stress Analysis and Test Fixture

Static structural analysis in Ansys of a two-stage helical gear train at rated torque — von Mises stress at the tooth contact, comparison of an existing and a modified gear pair, and the design of a test fixture to validate the result on a rig.

Ansys · SolidWorksUnited Kingdom
CAD model of an electric motor test rig with two motors on adjustable alignment bases coupled on a steel bed plate
Industrial Machinery & PressesMachines & Equipment

High-Speed E-Motor and Motion Test Rig

A 138-part test rig for a high-speed electric motor — stator stack, samarium-cobalt magnets, Inconel rotor sleeve, front and rear end frames — mounted on adjustable alignment bases with couplings, blast case and guide rods, delivered as a SolidWorks assembly with 26 drawings on the client template.

SolidWorksUnited Kingdom
Hydraulic Press With Automatic Feeder
Industrial Machinery & PressesMachines & Equipment

Hydraulic Press With Automatic Feeder

Custom hydraulic press with an integrated automatic feeder — frame, cylinder mounting and feed mechanism designed and timed as one system.

SolidWorks · AutoCADIndia
CAD model of an industrial steel shed structure with portal columns, roof framing and clad enclosure
Sheet Metal & Steel FabricationFabrication & Structures

Industrial Steel Shed 13.5 m × 7 m with Clad Enclosure

A 13,500 × 7,000 × 4,500 mm industrial steel structure — portal columns, roof framing, clad enclosure and foundation plates with anchor details — modelled as a SolidWorks weldment with a GA drawing and 3D PDF for a fabrication contractor.

SolidWorksIndia
CAD model of a large helical gear with LH helix and a mating pinion
Gearboxes & Power TransmissionGearboxes & Drives

Large Helical Gear & Pinion Models for Hobbing

83T and 101T LH/RH helical gears and an 11T pinion modelled from the customer's gear data for an alloy-steel gear manufacturer, with KISSsoft-checked tooth geometry and drawings carrying full gear data tables.

SolidWorks · KISSsoftIndia
Manufacturing Drawings & GD&T Detailing
Industrial Machinery & PressesDrafting, Conversion & MBD

Manufacturing Drawings & GD&T Detailing

Production drawings with full GD&T — dimensioned to ASME Y14.5 and ISO 128, with tolerances that reflect what the process can actually hold.

SolidWorks · AutoCADIndia
CAD model of a folding mattress lifter frame shown in open and closed positions
Sheet Metal & Steel FabricationFabrication & Structures

Mattress Lifter: Folding Frame Mechanism

A folding mattress lifter mechanism — switch-operated frame with nylon wear strips and a mattress stopper — modelled in SolidWorks in open and closed conditions with a two-sheet fabrication drawing set for an Australian fabricator.

SolidWorks · AutoCADAustralia
Medical Machine Development
Medical & Laboratory EquipmentMachines & Equipment

Medical Machine Development

Development of a custom medical machine — mechanism, enclosure and serviceable layout designed for a controlled clinical environment.

SolidWorksIndia
ISO GPS toleranced drawing of a die-cast aluminium gearbox housing with datums and surface finish symbols
Gearboxes & Power TransmissionDrafting, Conversion & MBD

Model-Based Definition Drawing Packages to ISO GPS

A paid-trial programme of model-based definition packages — reducer output shafts, stepped intermediate shafts, die-cast aluminium gearbox housings, brackets and bearing blocks — each delivered as AP242 STEP with PMI, a fully toleranced drawing and standard-view images for an international engineering data company.

SolidWorksInternational
Creo model of a moulded two-piece air intake duct with flanges and mounting bosses
Industrial Machinery & PressesProduct Development

Moulded Intake Duct in Creo with Design-State Data Package

A moulded air intake duct designed in PTC Creo Parametric as a two-state data package — task input and answer key — with split-line, draft and boss detailing, screenshots, STEP and PDF, delivered for an engineering data company.

PTC CreoInternational
CAD model of a cylindrical robot joint actuator with carbon-fibre style outer tube and green front plate
Industrial Machinery & PressesProduct Development

Planetary Actuator for a Quadruped Robot

A compact planetary joint actuator for a quadruped robot — outrunner rotor, sun gear, three planets on a carrier, 92.75 mm PCD ring gear, Hall-effect and communications PCBs, aluminium outer tube and rear cover — detailed through three design marks with 89 drawings.

SolidWorksUnited Kingdom
CAD model of an inline multi-stage planetary geared motor for a roll-bending machine, showing stacked reduction stages, a fan-cooled motor and a keyed output shaft
Industrial Machinery & PressesGearboxes & Drives

Planetary Geared Motor for a Roll-Bending Machine

Inline planetary geared motor designed for a roll-bending machine — stacked reduction stages, flange-mounted motor and a keyed output shaft.

SolidWorksIndia
CAD model of a long steel frame supported on three cylindrical drum bases
Sheet Metal & Steel FabricationFabrication & Structures

Planter Drum Bases with Pigeon-Hole Frames

Two powder-coated steel fitting-out units — a 3 m top on 695 mm drum bases with four pigeon holes, and a 1200 mm planter with drip tray on a framed base — detailed from the designer's marked-up PDF into angle-frame and drum fabrication drawings.

SolidWorksAustralia
CAD model of a shallow rectangular steel display tray frame with glass panel inserts
Sheet Metal & Steel FabricationFabrication & Structures

Powder-Coated Display Tray with Glass Inserts

A folded 1.5 mm mild steel retail display tray with a centre insert and five glass panels, modelled as sheet-metal parts with flat patterns and issued as a two-sheet drawing, DXF, STEP and 3D PDF for powder-coating and glazing.

SolidWorksAustralia
CAD model of a press drive gearbox with a spoked flywheel on the input shaft and twin output bearing covers
Gearboxes & Power TransmissionGearboxes & Drives

Press Drive Gearbox with Flywheel Input

A twin-output press drive gearbox with a flywheel on the input shaft, rebuilt in 3D from the manufacturer's 2D assembly drawing and parts list — housing, gear shafts, bearings, covers and flywheel — so it could be reissued as a complete machining and assembly package.

Solid Edge · AutoCADIndia
CAD model of a sheet-metal pump motor canopy with wire-mesh side guards
Sheet Metal & Steel FabricationFabrication & Structures

Pump Motor Canopies for a Process Plant

Weather canopies for cooling-tower and feed/CIP pump motors in a process plant — sheet-metal roofs, legs, covers and wire-mesh guards — designed in SolidWorks with flat patterns, DXFs and fabrication drawings carrying the customer's title block.

SolidWorks · AutoCADIndia
CAD model of a fabricated steel radar antenna support stand with base plate
Sheet Metal & Steel FabricationFabrication & Structures

Radar Antenna Support Stand: Steel Fabrication

A fabricated steel support stand for a radar antenna, modelled in SolidWorks from a layout sketch and issued in three iterations with STEP and PDF for fabrication — sections, base plate, bolted interface and lifting provision.

SolidWorks · AutoCADIndia
CAD model of a rotary screen textile printing machine with multiple print heads and drive side
Textile & Process MachineryTextile & Process Lines

Rotary Screen Printing Machine (1620 mm)

Full machine model and drawing set for a 1620 mm rotary screen textile printing machine — printing heads, screen drives, repeat gearboxes, blanket drive and frames — produced in Solid Edge with photographs of the built machine as verification.

Solid Edge · AutoCADIndia
CAD model of a long rectangular display frame in square hollow section with timber panel inserts
Sheet Metal & Steel FabricationFabrication & Structures

SHS Display Frames with Timber Panel Inserts

Large and small retail display frames in 25.4 and 22.2 mm square hollow section with MDF panel inserts — 2.08 m long, 634 mm bays — modelled and detailed as a numbered drawing set of eight with sections through the frame joints.

SolidWorksAustralia
Sheet Metal & Fabrication Design
Sheet Metal & Steel FabricationFabrication & Structures

Sheet Metal & Fabrication Design

Sheet metal and fabrication design with flat patterns, correct bend allowances and weld detailing — drawings the fabricator can cut and fold directly from.

SolidWorks · AutoCADIndia
CAD model of a long roller-bed stacker conveyor with fabricated steel frame and driven feed rollers
Industrial Machinery & PressesMachines & Equipment

Sheet Stacker Conveyor with Geared Drive Units

Four variants of a roller-bed stacker conveyor — 8.2 m fabricated frames, feed rollers, 20T and 21T × 4 M ground gear shafts, worm gear units with 2.2 kW motors and machined mounting brackets — modelled and detailed for a steel-processing line.

SolidWorksIndia
CAD model of a sheet-metal cyclone body with tangential inlet and top outlet
Sheet Metal & Steel FabricationDrafting, Conversion & MBD

Sheet-Metal Ductwork Package from a European Customer's Drawings

Two dust-extraction ductwork assemblies — cyclone body, transition and hopper cone — modelled in SolidWorks from a European customer's French-language 2D drawings, then issued as 21 part drawings with flat patterns and thickness-sorted DXF files for a Gujarat sheet-metal shop.

SolidWorksIndia
CAD model of a single-screw extruder gearbox with output thrust housing, input shaft and bolted covers
Gearboxes & Power TransmissionGearboxes & Drives

Single-Screw Extruder Gearbox Redesign, 90–125 kW

Redesign of a 200-frame single-screw extruder gearbox to cover 90, 100, 110 and 125 kW at 1440 rpm in five ratios (5:1 to 14:1) from one housing — input pinion 21T × 4.5 M, second-stage pairs in 5 M, EN353 case-carburised gears and a thrust bearing stack behind the output.

Solid Edge · AutoCADIndia
CAD model of a solventless laminating machine with unwind, coating head, laminating nip and rewind
Packaging & Converting MachineryTextile & Process Lines

Solventless Lamination Machine for Flexible Packaging

Complete engineering of a solventless laminating machine — main structure, coating and laminating nip with cooling roll, film guide and support roller assemblies, trays and electrical panel — modelled in Solid Edge with a full fabrication and assembly drawing set.

Solid Edge · AutoCADIndia
CAD model of a spiral bevel gear pair with splined input shafts
Gearboxes & Power TransmissionGearboxes & Drives

Spiral Bevel Gear Sets & Shafts for a Gear Manufacturer

Ongoing 3D modelling and drawing support for a gear manufacturer: 21T RH/LH spiral bevel input shafts in EN-353, cone gears, splined shafts and gearbox casings, with runout, hardness and spline notes the shop works to.

SolidWorks · KISSsoftIndia
3D CAD cutaway view of a right-angle spiral bevel gearbox showing internal splined shafts, deep-groove ball bearings, castellated nut and cast housing
Gearboxes & Power TransmissionGearboxes & Drives

Spiral Bevel Gearbox Design

3D CAD design of a right-angle spiral bevel gearbox — splined shafts, deep-groove ball bearings and a cast housing, proven in a full sectional view.

SolidWorks · AutoCADIndia
CAD model of a long stainless steel counter top with bullnose front edge and folded end panels
Sheet Metal & Steel FabricationFabrication & Structures

Stainless Steel Bullnose Counter Top

A 2.8 m stainless steel counter top with an R20 bullnose front edge, 60.5° angled return and folded end panels, modelled as a single 2 mm sheet-metal part with a verified flat pattern and bend sequence for a commercial kitchen fit-out.

SolidWorksAustralia
CAD model of a stainless steel door frame with square hollow section posts and divided panel infill
Sheet Metal & Steel FabricationFabrication & Structures

Stainless Steel Door and Window Frame Sets

Fabrication packages for four stainless steel door and window sets — 2155 × 810 and 2205 × 850 (LH and RH) doors, 1305 × 745 and 510 × 745 windows — with 40 × 40 SHS posts, 25 × 6 flat-bar frames, 2 mm sheet infill and ball-bearing hinges, in 32 drawings.

SolidWorksAustralia
Structural Guide Design
Sheet Metal & Steel FabricationFabrication & Structures

Structural Guide Design

Structural guide design for machine motion — rails, supports and mounting detailed for alignment and rigidity along the full travel.

SolidWorksIndia
CAD model of a cylindrical subsea insulation shroud around a pipe section
Pumps, Valves & Fluid HandlingProduct Development

Subsea Insulation Covers and Moulding Tooling in Inventor

Subsea flowline insulation shrouds and an insulation cover designed in Autodesk Inventor for an offshore systems manufacturer — 38 assemblies and 277 parts covering inner and outer pipe pups, weld preparations, coating layers and the two-part moulding tools (base plate and core, cavity, fill plate, inserts, vent plate) on A1 drawings.

Autodesk InventorIndia
Textile Machine Reverse Engineering
Textile & Process MachineryReverse Engineering

Textile Machine Reverse Engineering

Reverse engineering a textile machine with no surviving drawings — measured, modelled as a full assembly and re-documented for spare part manufacture.

SolidWorks · AutoCADIndia
CAD model of an eight-chamber textile stenter machine with entry and exit sections
Textile & Process MachineryTextile & Process Lines

Textile Stenter: Chambers, Mangle and Overfeed Sections

Engineering models and drawings for a textile stenter — 5- and 8-chamber heat-setting sections, entry and exit frames, mangle with trough lift and pressure rolls, and the overfeed feeding assembly — built in Solid Edge for a textile machinery OEM.

Solid Edge · AutoCADIndia
CAD model of a three-stage helical gearbox with twin output shafts and a cast housing with inspection cover
Gearboxes & Power TransmissionGearboxes & Drives

Three-Stage Helical Gearbox with Twin Output Shafts

A three-stage helical reduction gearbox with LH/RH twin outputs, designed as a locally manufacturable replacement for an imported gear unit — gears, shafts, taper-roller bearings, housing and covers.

SolidWorks · KISSsoftIndia
CAD model of a tractor-mounted mobile shredder with chassis, gearbox and PTO drive
Agricultural EquipmentMachines & Equipment

Tractor-Mounted Mobile Shredder with Combo Gearboxes

Complete CAD build of a tractor-mounted mobile shredder — chassis, primary and secondary combo gearboxes, rotor and hitch — from a parts manual and field photographs, delivered as SolidWorks assemblies, drawings, STEP and 3D PDFs.

SolidWorks · AutoCADIndia
CAD model of a multi-shaft gear drive with twelve meshing gears driving conveyor roller shafts
Industrial Machinery & PressesGearboxes & Drives

Twelve-Shaft Gear Drive for a Roller Conveyor

A gear-train drive turning twelve conveyor roller shafts from a single input — 26T × 3 M gears on 12 bearing-mounted shafts in a split housing, with ceramic support plates for a high-temperature process roller conveyor.

SolidWorksIndia
CAD model of a twin-shaft extruder gearbox showing two closely spaced internally splined output shafts, a heavy bolt-circle output flange and bolted split-casing stages
Gearboxes & Power TransmissionGearboxes & Drives

Twin-Shaft Gearbox for Plastics Processing

Twin-shaft gearbox for plastics processing machinery — two output shafts driven in phase, with thrust loads from extrusion taken into the housing.

SolidWorksIndia
CAD model of a long textile float dryer line with entry section, two chambers and exit plaiter
Textile & Process MachineryTextile & Process Lines

Two-Chamber Float Dryer and Plaiter Wall

A 60-inch two-chamber float dryer line with entry roll stand, after-washing table, auto printing head and a servo-lifted plaiter wall — 250 sub-assemblies modelled in Solid Edge with chain-wheel boxes, tie rods, pressure rolls and greasing lines detailed for the shop.

Solid EdgeIndia
CAD model of a two-stage EV gearbox housing containing a torque-biasing differential and half shafts
Gearboxes & Power TransmissionGearboxes & Drives

Two-Stage EV Gearbox with Torque-Biasing Differential

A two-stage helical gearbox for an electric vehicle with an integrated automatic torque-biasing differential — 23T/73T and 23T pinion stages, half shafts, Viton lip seals and a cast housing, prepared for simulation and manufacture.

SolidWorks · KISSsoftUnited Kingdom
CAD model of a two-stage planetary gearbox with cast motor mounting flange and output shaft carrier
Gearboxes & Power TransmissionGearboxes & Drives

Two-Stage Planetary Gearbox with Cast Flanges

Two-stage planetary gearbox design — 68T × 2.5 M and 63T × 1.8 M ring gears, carburised to 58–62 HRC — with cast motor flange, intermediate flanges and cover modelled as pattern-ready castings.

SolidWorksIndia
Isometric CAD model of a large-diameter girth gear ring for a crushing mill, showing external gear teeth, a pocketed web with radial stiffening ribs and a counterbored mounting flange
Gearboxes & Power TransmissionGearboxes & Drives

Two-Tonne Gear & Pinion for a Crushing Mill

A two-tonne custom gear and matching pinion for a crushing mill — heavy-section design for continuous high-torque duty in an abrasive environment.

SolidWorks · AutoCADIndia
A1 AutoCAD set-out drawing of prefabricated vehicle inspection pits in a transport depot
Sheet Metal & Steel FabricationDrafting, Conversion & MBD

Vehicle Inspection Pit Set-Out Drawings (A1, AutoCAD)

Installation set-out drawings for prefabricated vehicle inspection pits in a UK transport depot — produced in AutoCAD on A1 sheets from a site survey and photographs, to the pit manufacturer's drawing rules, with a query sheet before issue and DWG/PDF dispatch.

AutoCADUnited Kingdom
CAD model of a wall-mounted two-section swing arm with a cable stay and service droppers
Industrial Machinery & PressesMachines & Equipment

Wall-Mounted Workshop Swing Armature

A two-section wall-mounted swing armature in 100 × 50 × 3 aluminium RHS with a 2.5 m reach, steel rope and turnbuckle stay, end brackets and droppers delivering compressed air, power and vacuum to a workshop bay.

SolidWorksAustralia
CAD model of a wall-mounted workshop swing arm with vacuum and air pipes
Sheet Metal & Steel FabricationFabrication & Structures

Workshop Swing Arm with Vacuum and Air Services

A wall-mounted workshop swing arm carrying vacuum and compressed-air lines to the work area — pivoting fabricated arm, service pipes, spigots and fittings — designed in SolidWorks and revised through two rounds with an Australian fabrication client.

SolidWorks · AutoCADAustralia

Automation portfolio

The tools behind the drawings

Drawing creation, DXF export, nesting, PDF handling and document automation we built and run in-house, now available to clients.

See the automation portfolio

Your project could be next

Send drawings or a brief; an engineer replies within one business day with an itemised quote.