Skip to content

CAD Outsourcing · Germany

External CAD Design & Drafting Services for German Machine Builders

Sondermaschinenbau firms, automotive suppliers and engineering offices in Germany use us as an external Konstruktionsbüro for detail drawings, 3D modelling, FEA and reverse engineering — to DIN EN ISO standards, quoted in euros.

DIN EN ISO / ISO GPS drawingsQuotes in EURNDA before files
Engineer detailing a special-purpose machine assembly for a German machine builder

Why Germany teams work with us

Capacity For A Market Short Of Design Engineers

German machine builders face a persistent shortage of Konstrukteure and technical drafters. The design decisions stay in-house; what we take on is the time-consuming, well-defined work around them — Fertigungszeichnungen from existing models, sheet metal and weldment detailing, 2D-to-3D conversion of legacy archives, and strength calculations.

India is 3.5 hours ahead of Germany in summer and 4.5 in winter. We start at 05:30 CEST, so your entire morning and early afternoon overlap with our working day, and smaller jobs sent in your afternoon are usually ready the next morning.

What you get on every job

  • Drawings to ISO GPS: ISO 8015 independence principle, ISO 1101, ISO 2768-mK or ISO 22081
  • ISO 7200 title blocks, first-angle projection, metric units, A-series sheets
  • German drawing notes and title-block text from wording you supply
  • Fixed, itemised quotes in EUR, paid by international bank transfer
  • NDA before any file is shared; GDPR (DSGVO)-aware handling of personal data
  • Most drafting jobs turned around in 2–3 working days
How we work

Delivered work

Projects relevant to Germany

Case studies from our portfolio that match the work Germany engineering teams send us. Client names are shown with permission or withheld under NDA.

CAD model of a sheet-metal cyclone body with tangential inlet and top outlet
Sheet Metal & Steel FabricationDrafting, Conversion & MBD

Sheet-Metal Ductwork Package from a European Customer's Drawings

Two dust-extraction ductwork assemblies — cyclone body, transition and hopper cone — modelled in SolidWorks from a European customer's French-language 2D drawings, then issued as 21 part drawings with flat patterns and thickness-sorted DXF files for a Gujarat sheet-metal shop.

SolidWorksIndia
ISO GPS toleranced drawing of a die-cast aluminium gearbox housing with datums and surface finish symbols
Gearboxes & Power TransmissionDrafting, Conversion & MBD

Model-Based Definition Drawing Packages to ISO GPS

A paid-trial programme of model-based definition packages — reducer output shafts, stepped intermediate shafts, die-cast aluminium gearbox housings, brackets and bearing blocks — each delivered as AP242 STEP with PMI, a fully toleranced drawing and standard-view images for an international engineering data company.

SolidWorksInternational
CAD model of a two-stage planetary gearbox with cast motor mounting flange and output shaft carrier
Gearboxes & Power TransmissionGearboxes & Drives

Two-Stage Planetary Gearbox with Cast Flanges

Two-stage planetary gearbox design — 68T × 2.5 M and 63T × 1.8 M ring gears, carburised to 58–62 HRC — with cast motor flange, intermediate flanges and cover modelled as pattern-ready castings.

SolidWorksIndia
Solid Edge model of a twin-screw extruder gearbox with torque-splitting output stage and thrust bearing pack
Gearboxes & Power TransmissionGearboxes & Drives

Extruder Gearbox Range in Solid Edge

A family of single- and twin-screw extruder gearboxes — torque-splitting twin-output units with thrust packs — documented as Solid Edge assemblies with sectional GAs and machining drawings for every frame size.

Solid Edge · AutoCADIndia
Ansys total deformation plot of an electric drive unit gearbox housing under 7,000 N·m forward torque
Gearboxes & Power TransmissionGearboxes & Drives

EV Gearbox Housing FEA: Torque, Static and Shock Load Cases

Ansys structural analysis of an electric drive unit gearbox and motor housing under 7,000 N·m forward and reverse torque, bolted-joint static cases and 10 g shock in several orientations, with deformation and stress maps used to revise the housing before casting.

Ansys · SolidWorksUnited Kingdom
CAD model of an eight-chamber textile stenter machine with entry and exit sections
Textile & Process MachineryTextile & Process Lines

Textile Stenter: Chambers, Mangle and Overfeed Sections

Engineering models and drawings for a textile stenter — 5- and 8-chamber heat-setting sections, entry and exit frames, mangle with trough lift and pressure rolls, and the overfeed feeding assembly — built in Solid Edge for a textile machinery OEM.

Solid Edge · AutoCADIndia

Built for Germany

Built For German Engineering Teams

Shared working day

India is 3.5 hours ahead of CEST and 4.5 ahead of CET. We cover your morning and early afternoon live, and work on while you are offline.

DIN EN ISO drawing practice

ISO GPS tolerancing with explicit ISO 8015 or Ⓔ envelope callouts, ISO 2768 or ISO 22081 general specifications, and your own Zeichnungsnorm and templates.

CE technical documentation

Drawings, Stücklisten and calculations structured for your technical file under the Machinery Directive 2006/42/EC and Machinery Regulation (EU) 2023/1230.

DSGVO and confidentiality

NDA (Geheimhaltungsvereinbarung) first. We need engineering data, not personal data, and handle anything personal in line with GDPR.

Fixed prices in euros

Each Angebot lists scope, deliverables, formats, standard and delivery date — Festpreis, not open-ended hours.

One named engineer

A named engineer handles your jobs, so knowledge of your machines and standards carries forward.

Process

From enquiry to native files

Industries

Sectors We Support In Germany

Our German work is Maschinenbau: special-purpose and automation machine design (Sondermaschinenbau), packaging machines, conveying and material-handling equipment, gearboxes and drive components, agricultural machinery, and sheet metal and welded constructions for subcontract manufacturers.

See the project portfolio — including bevel gearbox design, twin-shaft gearbox, welded gearbox housing and carton cutting machine. Read our guide to the EU Machinery Regulation 2023/1230.

Native CAD delivery

FAQ

Questions from Germany buyers

Do you work to German drawing conventions?

Yes. We apply ISO GPS with the ISO 8015 independence principle, ISO 2768-mK (or ISO 22081) general tolerances, ISO 7200 title blocks, first-angle projection and metric units — or your own company Zeichnungsnorm and templates.

Can drawings carry German text?

Yes. Send the approved German notes, material designations and title-block text (or an existing drawing) and we use them consistently. Our correspondence is in English.

Can you support CE marking documentation?

We produce the engineering content of the technical file — drawings, parts lists, calculations and FEA reports. Risk assessment, conformity assessment and the EU Declaration of Conformity remain with the manufacturer.

Do you quote in euros?

Yes — fixed, itemised quotes in EUR, paid by international bank transfer. Send the requirement and you get a firm figure, usually within one business day.

Konstruktion Overloaded? Send Us The Overflow

Send drawings, a sketch or a description. An engineer replies with an itemised quote in EUR, deliverables and a timeline — usually within one business day.