Skip to content

CAD Outsourcing · United Kingdom

CAD Drafting & Engineering Design Outsourcing for UK Manufacturers

UK machine builders, fabricators and product companies send us their 2D drafting, 3D modelling, FEA and reverse engineering work. Drawings are produced to BS 8888 and ISO GPS, quoted in pounds sterling, and covered by an NDA before a single file is shared.

BS 8888 and ISO GPS drawingsQuotes in GBPNDA before files
CAD engineer detailing a 3D SolidWorks assembly for a UK manufacturing client

Why The UK teams work with us

An Extra Design Office, Working Your Morning

Most UK engineering teams outsource for one of three reasons: a backlog of drawings the in-house team cannot clear, a one-off job (a simulation, a scan, a legacy drawing conversion) that does not justify a hire, or a design office that needs more capacity without more overhead. We handle all three for clients in the UK and across Europe.

Our offices in Ahmedabad and Gandhinagar open at 9:00 IST — that is 04:30 BST / 03:30 GMT. By the time your team starts, we have already had half a working day on your job, and we overlap with your whole morning for calls, mark-ups and questions. Work you send at the end of your afternoon is usually back in your inbox the next morning.

What you get on every job

  • Drawings to BS 8888, ISO 128 and ISO GPS — or to your own company template
  • Metric units, first-angle projection and A-series sheets by default
  • Fixed, itemised quotes in GBP, invoiced by international bank transfer
  • NDA signed before files are shared; UK GDPR-aware handling of any personal data
  • Native SolidWorks, Inventor, Creo, Solid Edge, NX and AutoCAD files, plus STEP and PDF
  • Most drafting jobs turned around in 2–3 working days
How we work

Delivered work

Projects relevant to The UK

Case studies from our portfolio that match the work The UK engineering teams send us. Client names are shown with permission or withheld under NDA.

CAD model of an electric motor test rig with two motors on adjustable alignment bases coupled on a steel bed plate
Industrial Machinery & PressesMachines & Equipment

High-Speed E-Motor and Motion Test Rig

A 138-part test rig for a high-speed electric motor — stator stack, samarium-cobalt magnets, Inconel rotor sleeve, front and rear end frames — mounted on adjustable alignment bases with couplings, blast case and guide rods, delivered as a SolidWorks assembly with 26 drawings on the client template.

SolidWorksUnited Kingdom
CAD model of a cylindrical robot joint actuator with carbon-fibre style outer tube and green front plate
Industrial Machinery & PressesProduct Development

Planetary Actuator for a Quadruped Robot

A compact planetary joint actuator for a quadruped robot — outrunner rotor, sun gear, three planets on a carrier, 92.75 mm PCD ring gear, Hall-effect and communications PCBs, aluminium outer tube and rear cover — detailed through three design marks with 89 drawings.

SolidWorksUnited Kingdom
CAD model of a concentric reduction gearbox integrated with an electric motor and inverter
Gearboxes & Power TransmissionGearboxes & Drives

Concentric Reduction Gearbox for an Electric Drive Unit

Concept-to-detail design of a concentric reduction gearbox packaged around an electric motor for a UK drivetrain developer — gear train, housing, bearings, sealing and CV-joint interface, iterated with the client through weekly design reviews.

SolidWorks · KISSsoftUnited Kingdom
CAD model of a tandem-axle trailer carrying a diesel pump set with portal frame and hood
Pumps, Valves & Fluid HandlingMachines & Equipment

HD4K Trailer-Mounted Pump Unit with Tandem Axles

Trailer-mounted variant of a heavy-duty pump set — 3.5 t towing, tandem axles rated 4 t, UB portal, RHS hood posts, sheet-metal hood and guards, engine and pump — built as a fully mated SolidWorks assembly with structural and GA concepts and an R4 drawing set.

SolidWorksUnited Kingdom
Ansys total deformation plot of an electric drive unit gearbox housing under 7,000 N·m forward torque
Gearboxes & Power TransmissionGearboxes & Drives

EV Gearbox Housing FEA: Torque, Static and Shock Load Cases

Ansys structural analysis of an electric drive unit gearbox and motor housing under 7,000 N·m forward and reverse torque, bolted-joint static cases and 10 g shock in several orientations, with deformation and stress maps used to revise the housing before casting.

Ansys · SolidWorksUnited Kingdom
Ansys von Mises stress plot of a helical gear train showing contact stress on the pinion and gear teeth
Gearboxes & Power TransmissionGearboxes & Drives

Helical Gear Pair Contact Stress Analysis and Test Fixture

Static structural analysis in Ansys of a two-stage helical gear train at rated torque — von Mises stress at the tooth contact, comparison of an existing and a modified gear pair, and the design of a test fixture to validate the result on a rig.

Ansys · SolidWorksUnited Kingdom

Built for The UK

Built For The Way UK Teams Work

Four to five hours of shared working time

India is 4.5 hours ahead of BST and 5.5 hours ahead of GMT. We are online for your full morning, and overnight turnaround is the normal pattern for smaller jobs.

Your standards, not ours

We work to BS 8888, ISO 128, ISO 1101 and ISO 2768, first-angle projection, or to your own drawing template, title block and layer standards when you send them.

Confidentiality first

A mutual NDA is signed before you share drawings. Files are shared through the channel you choose, and we only need engineering data — not personal data — to do the work.

Clear pricing in sterling

Each quote states scope, deliverables, file formats, standard and deadline, priced in GBP. No hourly meter running in the background.

Compliance-ready documentation

Drawings, BOMs and design calculations organised so they can feed your technical file for UKCA or CE conformity.

One named engineer

You deal with the engineer doing the work, not a ticket queue — so context about your product carries from one job to the next.

Process

From enquiry to native files

Send the requirement

Email [email protected] or use the quote form with drawings, sketches, models or photos, plus the standard and file format you need.

NDA and fixed quote

We sign your NDA (or send ours) and reply with an itemised quote in GBP, usually within one business day.

Questions before modelling

We list anything ambiguous in your input — missing dimensions, tolerances, materials — and agree it with you before work starts.

Work and internal check

The job is modelled and detailed, then goes through an internal check for drawing standards and manufacturability before it leaves us.

Delivery and revisions

You receive native and neutral files. Mark-ups go straight back to the same engineer, and the quote states how many revision rounds are included.

Industries

Sectors We Support In The UK

Our work for UK and European clients centres on mechanical engineering: special-purpose machinery, packaging and converting equipment, agricultural machinery and gearboxes, hydraulic presses, material handling, sheet metal and structural fabrication, and medical and laboratory equipment.

See examples in our project portfolio — including agricultural gearbox design, packaging machinery, medical machine development and 3D scanning to CAD.

Native CAD delivery

FAQ

Questions from The UK buyers

Can you produce drawings to BS 8888?

Yes. We detail to BS 8888 and the ISO GPS standards it references, in first-angle projection and metric units, unless you ask for something else. If you have a company drawing template, title block or CAD standard, we use that.

How do time zones work between the UK and India?

India Standard Time is 4.5 hours ahead of British Summer Time and 5.5 hours ahead of GMT. Our working day starts at 04:30 BST, so we overlap with your entire morning for calls and questions, and small jobs sent in your afternoon are typically back the next morning.

Do you quote and invoice in pounds?

Yes. Every quote is a fixed, itemised price in GBP, and invoices are paid by international bank transfer. We do not publish standard prices because every drawing package is different — send the requirement and you get a firm number, usually within one business day.

How do you protect our drawings and IP?

We sign an NDA before receiving files, as standard practice on every engagement. Ownership of the deliverables is set out in writing in your engagement terms, and one client’s geometry is never reused for another.

Can you support UKCA or CE documentation?

We prepare the engineering content a technical file needs — GA and detail drawings, BOMs, design calculations and simulation reports. The conformity assessment and Declaration of Conformity remain the responsibility of the manufacturer.

Need Drawings Done Before Monday?

Send drawings, a sketch or a description. An engineer replies with an itemised quote in GBP, deliverables and a timeline — usually within one business day.