Skip to content

Insights

Engineering guides written by the people who do the work

Drawing standards, sheet-metal rules, simulation pitfalls, conversion workflows and what to expect when you outsource. No marketing filler; the same explanations we give clients on the phone.

Concentric EV reduction gearbox from a Sarjan Solution case study
ASME Y14.5 vs ISO GPS: Key Differences
Standards

ASME Y14.5 vs ISO GPS: Key Differences

ASME Y14.5 and ISO GPS drawings look alike but mean different things: envelope vs independency, projection, general tolerances and units.

3 Oct 2026
What Drives Reverse Engineering Cost?
Reverse Engineering

What Drives Reverse Engineering Cost?

Why reverse engineering quotes vary: part complexity, measuring vs 3D scanning, design intent, tolerances, materials and output. How to get an accurate quote.

3 Oct 2026
2D to 3D CAD Conversion Checklist
CAD Conversion

2D to 3D CAD Conversion Checklist

Before converting legacy 2D drawings into 3D models, work through this checklist: drawing quality, missing dimensions, standards and the deliverables you need.

7 Aug 2026
How to Choose a CAD Outsourcing Partner
Outsourcing

How to Choose a CAD Outsourcing Partner

Choosing a CAD outsourcing partner on price alone is how projects get re-drawn twice. What actually separates a reliable partner from a cheap one.

7 Aug 2026
FEA vs CFD: Which Simulation Do You Need?
Simulation

FEA vs CFD: Which Simulation Do You Need?

FEA tells you whether a part will break; CFD tells you how fluid moves through it. How to tell which simulation your design needs, or whether it needs both.

7 Aug 2026
5 Common FEA & CFD Simulation Mistakes
Simulation

5 Common FEA & CFD Simulation Mistakes

Simulation is only as good as the assumptions behind it. The five mistakes that most often invalidate FEA and CFD results, and how to avoid them.

18 Mar 2026
2D to 3D CAD Conversion: Workflow Guide
CAD Conversion

2D to 3D CAD Conversion: Workflow Guide

Converting legacy 2D drawings into fully featured 3D models is one of the most misunderstood CAD services. How a reliable conversion workflow actually runs.

2 Feb 2026
Reverse Engineering With 3D Scanning
Reverse Engineering

Reverse Engineering With 3D Scanning

When a part has no drawing, no CAD file and no manufacturer left to call, 3D scanning is where reverse engineering begins. From point cloud to production CAD.

12 Jan 2026

A question these guides do not answer?

Ask the engineers directly: send the drawing or the problem and we will reply with a practical answer, not a brochure.