Design & Drafting
Mechanical Product Design & Development Services
Engineering-led product development for industrial and equipment manufacturers: concept, detail design, design for manufacturing and assembly, prototype iteration and a complete manufacturing package. We work as an extension of your engineering team — proposing options, running the calculations and iterating until the design is ready to build.

Overview
From Concept Sketch To Production Package
Product development stalls where the concept meets manufacturing: tolerances that no process can hold, assemblies that need three hands, parts that cost twice the estimate. We design with those constraints from the first layout — selecting processes and materials early, running DFM and DFA reviews at each stage and building the model so that a change in one dimension does not become a redraw.
This is mechanical product development for physical, industrial products: equipment, machinery modules, enclosures, mechanisms and fabricated assemblies. For regulated medical hardware see our dedicated medical equipment design service.
Buyers call this work different things: mechanical product design, new product development (NPD), product engineering or, in the UK, a product design consultancy. The engineering job is the same: turn a requirement into a product that can be made, assembled and serviced at the target cost. We take on that engineering work for OEMs, start-ups and equipment makers worldwide, natively in SolidWorks, Inventor, Creo, Solid Edge, NX or AutoCAD, from our offices in Ahmedabad and Gandhinagar. An NDA is signed before any file is shared and the design is yours. Our working day overlaps the UK and European morning, and teams in the Americas and Australia get a review-ready update by their next morning. Form-and-fit prototypes come from our in-house 3D printing, and recent examples include a drone airframe and payload mechanism and a planetary actuator for a quadruped robot.
- Concept generation, layout options and feasibility studies
- Detail mechanical design with design calculations and material selection
- Design for manufacturing (DFM) and design for assembly (DFA) reviews
- Prototype design support, test-feedback iteration and design freeze
- Design validation with FEA/CFD where loads, heat or flow matter
- Production drawing packages, BOMs and supplier-ready documentation
What we do not do: We do not provide industrial styling, branding or consumer-electronics PCB design; our focus is mechanical engineering of industrial products.
Scope
Product Development Capabilities
Concept & Feasibility
Layout options with mass, cost and manufacturability estimates so you choose a direction on evidence, not a rendering.
Design For Manufacturing
Process-aware design for machining, sheet metal, casting, fabrication and injection moulding — draft, ribs, radii, tolerances and datum schemes set for the real process.
Design For Assembly
Part count, fastener rationalisation, self-locating features and assembly sequence checked in the model before the first build.
Prototype Iteration
Prototype drawings and in-house 3D printed form-fit models, then design updates from test feedback with controlled revisions.
Design Validation
Strength, stiffness, thermal and flow checks in Ansys with reports your reviewers can audit.
Production Package
Manufacturing drawings, BOMs, assembly instructions and supplier packs in your CAD and standard.
What you send
Inputs we work from
- A product brief, requirements list or problem statement
- Sketches, reference products, competitor parts or an existing design to improve
- Target cost, volumes, manufacturing processes and preferred suppliers
- Environmental and performance requirements (loads, temperatures, duty, ingress)
- Standards or regulations the product must meet in its market
- Your CAD platform, template and any existing modules or components
What you receive
Deliverables
Concept stage
- Concept layouts and 3D proposals with trade-off summary
- Feasibility notes: mass, cost drivers, process and risk
- Decision record for the chosen direction
Detail stage
- Parametric native CAD with configurations and design tables
- Design calculations, DFM/DFA review notes and tolerance stack-ups
- FEA/CFD reports where applicable
Release stage
- Manufacturing and assembly drawings, BOMs and exploded views
- STEP/IGES/Parasolid and PDF for suppliers; DXF for sheet metal
- Change log and revision history through to design freeze
Standards
Drawn to your standard, not ours
- ASME Y14.5-2018 (R2024) / ISO GPS — GD&T on production drawings, to your market
- BS 8888:2025, AS 1100, SP 46 — Drawing presentation for UK, Australian and Indian clients
- ISO 12100:2010 / ANSI B11.0-2023 — Risk-reduction principles for equipment products; conformity remains with the manufacturer
- Process design guides — Sheet metal, casting, machining and moulding design rules applied in DFM reviews
- AWS A2.4:2020 / ISO 2553:2019 — Weld symbols on fabricated products
Native delivery
Six CAD platforms, your version
Files are delivered native in the platform your team opens, saved to your release, plus STEP, IGES, Parasolid, DXF and PDF as needed.
How the job runs
Process on every product design job
Brief to specification
We turn the brief into measurable requirements and quote the development in stages, each with a fixed price and deliverables.
Concept selection
Options are presented with manufacturability and cost notes; you select, we freeze the concept.
Detail and validate
Detail design with DFM/DFA reviews, calculations and simulation where needed; prototype support and iteration.
Release package
Independently checked drawings and BOMs released in your CAD; support through first production.
Proof
Case studies from this service
A product taken from concept to production: layout options, detail design with DFM review, prototype iteration and a complete manufacturing drawing package in SolidWorks and AutoCAD — including the BOM and supplier-ready neutral files.

Planetary Actuator for a Quadruped Robot
A compact planetary joint actuator for a quadruped robot — outrunner rotor, sun gear, three planets on a carrier, 92.75 mm PCD ring gear, Hall-effect and communications PCBs, aluminium outer tube and rear cover — detailed through three design marks with 89 drawings.

Concept to Production Product Development
End-to-end product development — concept, detailed design, design for manufacture review and a complete production drawing package.

Friction Clutch & Flywheel Assembly Redesign
Single-plate friction clutch, pressure plate and flywheel assembly redesigned in SolidWorks from existing pressure-plate and clutch-plate drawings and reference parts, with a complete main assembly, centre-pin variant and manufacturing drawings.
Commercials
Three ways to engage
No price lists — every package is quoted on its inputs — but the model is always one of these.
Fixed-price project
Defined scope, itemised quote, agreed delivery date. Best for drawing packages, conversions, reverse engineering and analysis studies with clear inputs.
Hourly with a cap
For design development where scope evolves. Weekly hours against an agreed cap; nothing exceeded without approval.
Dedicated engineer
A named engineer on your work month by month, inside your CAD, PDM and standards — an extension of your drawing office.
NDA before files
Your NDA or ours, signed before any drawing changes hands. IP transfers to you on payment.
Controlled access
Only the engineers on your job see your files; stored on controlled systems, deleted on request.
Second-engineer check
Every package checked against your inputs and standard by an engineer who did not do the work.
Technical FAQ
Questions engineers ask before outsourcing product design
At what stage should we bring you in?
Earlier is cheaper. The best value is at concept, when process and material choices still set the cost; but we also take over detail design, DFM clean-up of an existing design or production drawing packages on their own.
How do you run a DFM review?
Against the actual process: machining access and tolerances, sheet metal bend radii and relief, casting draft and wall thickness, moulding draft, ribs and sink marks. Findings are listed with a recommended change and the cost or quality reason for each.
Can you support prototyping?
Yes. We prepare prototype drawings and STL files, print form-and-fit models in-house, and fold test results back into the design with controlled revisions.
Who owns the design and the IP?
You do. Models, drawings and calculations are assigned to you on payment; we keep no rights and sign an NDA before work starts.
Do you design for a specific manufacturing supplier?
If you have one, we design to their capabilities and preferred materials and formats. If not, we design to standard process capabilities and note where a supplier quote should be checked.
Can you work in our CAD system and PDM?
We deliver native files in SolidWorks, Inventor, Creo, Solid Edge, NX or AutoCAD and follow your file naming, properties and revision scheme so files check in cleanly to your PDM.
How are stages priced?
Per stage, fixed price, with deliverables and a date, and you get the quote within one business day of sending the brief. Evolving research work can run hourly with an agreed cap; long programmes can use a dedicated engineer.
Is it safe to outsource product development to India?
It is when the IP terms are settled first. We sign your NDA before any file is shared, assign all models, drawings and calculations to you on payment and never reuse a client design. You review every stage before the next one starts.
Do you design electronics enclosures, jigs and test rigs?
Yes, as mechanical work: sheet metal, machined and moulded enclosures with mounting, cable entry and cooling provisions, plus assembly jigs, fixtures and test rigs. The circuit and PCB design stays with your electronics team; we design around their board outlines and connectors.
How do you hand the design over to our manufacturer?
As a supplier-ready release: manufacturing and assembly drawings to your standard, BOM, STEP and PDF for every part, DXF for sheet metal, and a change log. We answer supplier queries and update the package through first-off parts.
Related services
Send the job. Get an engineer's answer.
Drawings, a sketch or a description — itemised quote, deliverables list and timeline within one business day (IST).